8 Step Strategies If Your Phone Fell Water
Follow @mibimibo8 Step Strategies If Your Phone Fell Water | Some parts of Indonesia continued to rain for the past week. As a result, some areas inevitably inundated. In the midst of the rainy weather and flooding, so one mobile electronic devices that are susceptible to corruption.
Usually, the damage was initiated when mobile phones are there in the pocket exposed seepage of rain water, or especially if the phone was plunged into the flood water. (See also: 5 Mobile's Ready Crashing Flood ). This blog about Information Technology and The Latest Gadgets.
Of course no one wants to experience it. But, if you let it happen, you do not need to worry. We have a few steps that you can take to provide "first aid" if your phone does get wet.
Follow the steps below:
1. The first thing you do is make sure the phone is on or not. If immediate death, do not jump on. If still on, turn off the phone to avoid shorting.
2. Remove the battery, casing, and other accessories. Then, drain everything.
3. To dry all the components must use light, for example close to the lamp. Avoid drying and mobile components of direct sunlight, as this can cause damage to the cells of color on the LCD screen.
4. Alternatively, you can use a blower. For normal flood conditions off the lights, you can also use a simple fan to dry.
5. Then, remove the water droplets are visible. You can use a cotton swab, tissue, or other fine material that can absorb water.
6. Wherever possible, put in a special fluid in the hole on a mobile phone charger connector, for example, liquid alcohol or perfume. The goal is to clean the connector of fluids that cause rust. It would be better if you spray the contact cleaner anti-rust.
7. Allow the phone for one or two days until it is completely dry. Then try to turn it back on.
8. Splashed If your phone long enough and after doing the above steps langlah does not go on, or dead-alive, dead even in total, immediately take it to an authorized service and warranty.
See also :
Usually, the damage was initiated when mobile phones are there in the pocket exposed seepage of rain water, or especially if the phone was plunged into the flood water. (See also: 5 Mobile's Ready Crashing Flood ). This blog about Information Technology and The Latest Gadgets.
Of course no one wants to experience it. But, if you let it happen, you do not need to worry. We have a few steps that you can take to provide "first aid" if your phone does get wet.
Follow the steps below:
1. The first thing you do is make sure the phone is on or not. If immediate death, do not jump on. If still on, turn off the phone to avoid shorting.
2. Remove the battery, casing, and other accessories. Then, drain everything.
3. To dry all the components must use light, for example close to the lamp. Avoid drying and mobile components of direct sunlight, as this can cause damage to the cells of color on the LCD screen.
4. Alternatively, you can use a blower. For normal flood conditions off the lights, you can also use a simple fan to dry.
5. Then, remove the water droplets are visible. You can use a cotton swab, tissue, or other fine material that can absorb water.
6. Wherever possible, put in a special fluid in the hole on a mobile phone charger connector, for example, liquid alcohol or perfume. The goal is to clean the connector of fluids that cause rust. It would be better if you spray the contact cleaner anti-rust.
7. Allow the phone for one or two days until it is completely dry. Then try to turn it back on.
8. Splashed If your phone long enough and after doing the above steps langlah does not go on, or dead-alive, dead even in total, immediately take it to an authorized service and warranty.
See also :
